Technical Parameters | CK-50 |
Maximum Swing Diameter Over Bed | ∮500 mm |
Maximum Turning Diameter | |
- For Disc Parts | ∮480 mm |
- For Shaft Parts | ∮360 mm |
Maximum Center Distance | 500 mm |
Bed Inclination | Hardened guideway with plastic |
Layout | 45° inclined layout |
Maximum Travel | |
- X Axis | 280 mm |
- Z Axis | 600 mm |
Spindle Structure / Spindle Bearings | Independent spindle / Domestic spindle bearings |
Spindle Head Model | A2-6 |
Spindle Internal Taper | MT6# |
Spindle Hole Diameter | ∮56 mm |
Maximum Spindle Speed | 1800 rev/min |
Spindle Servo Motor Power | ≥11 kW |
Recommended Servo Motor Power | |
- X Axis | 1 kW |
- Z Axis | 1.5 kW |
Positioning Accuracy | |
- X Axis | 0.016 mm |
- Z Axis | 0.020 mm |
Repeatability | |
- X Axis | 0.003 mm |
- Z Axis | 0.005 mm |
Roundness | 0.005 mm |
Straightness | 0.020 mm / Length 300 mm |
Flatness | 0.020 mm / Diameter 300 mm (only concave allowed) |
Surface Roughness (Steel Parts) | Ra ≤ 0.8 |
Tool Holder Type | Eight, Ten, or Twelve Stations |
Square Tool Holder Size | □25 × 25 mm |
Tool Holder Center Height / Maximum Diameter | ≤130 mm / ∮450 mm |
Hydraulic Tailstock Sleeve Diameter / Stroke | ∮58 mm / 120 mm |
Hydraulic Tailstock Taper | MT4# |
Cooling / Oil Pump / Lubrication Motor Power | 1.5 / 1.5 / 0.06 kW |
Dimensions (L x W x H) | 1780 x 970 x 1450 mm |
Net Weight | 2800 kg |
技術參數 | CK- 50 |
床身上*大回轉直徑 | ∮500mm |
*大車削直徑 | 盤類零件∮480mm |
軸類零件∮360mm | |
*大頂尖距 | 500 mm |
床身與水平傾斜度 | 硬軌貼塑 45°斜式布局 ， |
*大行程 | X軸：280 mm Z軸：600 mm |
主軸結構/主軸軸承 | 獨立主軸 / 國產主軸軸承 |
主軸頭型號 | A2-6 |
主軸內孔錐度 | MT6# |
主軸孔徑 | ∮56mm |
主軸*高轉速 | 1800 rev/min |
主軸伺服電機功率 | ≥11KW |
推薦伺服電機功率 | X軸：1KW Z軸：1.5KW |
定位精度 | X軸：0.016 mm Z軸：0.020 mm |
重復定位精度 | X軸：0.003 mm Z軸：0.005 mm |
圓度 | 0.005 mm |
直線一致性 | 0.020 mm /長度300mm |
平面度 | 0.020 mm /直徑300mm，只許中凹 |
表面粗糙度（鋼件） | Ra≤0.8 |
刀架型式 | 八 ，十或十二工位 |
四方刀具柄規格 | □25 X 25 mm |
刀架中心高/刀盤*大直徑 | ≤130 mm / ∮450mm |
液壓尾座套筒直徑/行程 | ∮58mm / 120mm |
液壓尾座頂尖錐度 | MT4# |
冷卻/油泵/潤滑電機功率 | 1.5 / 1.5 / 0.06 KW |
外形尺寸 mm | 1780 x 970 x 1450 |
凈重 | 2800Kg |
